Ryobi 18-Volt One+ Cordless Bolt Cutters (Tool Only)

Product Information

We charged the lithium-ion battery overnight and then started testing by cutting baling wire. Unfortunately, the blades left about a 1/16-inch gap when cutting rather than touching together, meaning the cordless tool failed to cut. We pulled the baling wire out of the almost-closed jaws, and it didn’t have a scratch on it. When testing them on all thread, the jaws stopped closing once they met the metal. We kept pressure on the trigger, but no deal. You can expect maximized leverage and improved cutting power with less effort due to the longer handle, compound hinges, and precisely aligned blades. Four Sided Rotatable Cutting Dies Allow You to Cut Three Different Sizes of Threaded Rod with the Same Tool

Even with a quality bolt cutter, cutting through metal can be an uphill task requiring significant upper-body strength. This bolt cutter from H.K. Porter makes cutting more manageable thanks to its double-compound hinge design, which increases the handle’s leverage. Make sure the edges of the tool are sharp as blunt or worn edges need a lot more force to make an accurate cut Klauke® may make improvements and/or changes in the specifications of products at any time, in its sole discretion, without notice or obligation and further reserves the right to change or discontinue models. Ensure tools are clean and sharp because greasy or worn-down edges can compromise safety and could cause repetitive strain injuries with prolonged useMade in Germany, the CoBolt offers you an exceptional cutting performance with minimum effort due to its tough steel construction and high leverage design. Anyone who’s done mechanical work or needed to cut off too-long bolts has likely run into the issue of cutting a bolt and getting a jagged end that had to be filed down by hand. This is a nonissue with the DeWalt bolt cutter. All we had to do was put a threaded bolt between the cutter’s jaws and pull the trigger. The curved blades on the tool (which comes with a 2-amp hour rechargeable battery and charger) immediately tightened around the bolt and cut it cleanly in half. We cut all thread up to 3/16 inch, and the DeWalt didn’t strain once under the task.

These tools use levers to extend and increase the strength of grip. By pressing on the handles, holding power is magnified and directed to the point where the pincers meet. Diagonal cutters are designed for crimping or wedging cable apart to allow precision cuts. They provide a diagonal cut and are commonly used on soft copper or aluminium electrical conductors. Various types and brands are available, but you should be aware that they can also be categorised by size. This can relate to one of two specifications - jaw length or overall tool length. Both are typically measured in millimetres (mm).There are different types of cutting blades for bolt cutters, including angle cut, center cut, shear cut, and clipper cut blades. Bolt cutters are usually available in 12, 14, 18, 24, 30, 36 and 42 inches (30.5, 35.6, 46, 61, 76, 91.4 and 107cm) in length. The length is measured from the tip of the jaw to the end of the handle. Do not use cushioned levers when working with electrical wiring as they are not insulated and do not offer a sufficient level of protection The manufacturer says the tool cuts up to ⅞-inch threaded bolts, and while we didn’t have any on hand to test, we think the DeWalt has enough cutting power to do the job. It features a forged steel head, multiple cutting blades, and steel handles with rubberized grips for control and comfort. A convenient carrying case provides storage for the cutter and a set of spare blades.

We are long-time fans of Ryobi, one of The Home Depot’s flagship brands, but the Ryobi One+ 18V Cordless Bolt Cutters didn’t meet our high standards this time. With superior cutting action, industry-leading design, and utilizing smart PowerPivot™technology, the Crescent H.K. Porter 18-inch 0090MCP Bolt Cutter is the perfect metal cutting solution for industrial-style applications. Center cut allows the tools to cut through a wide variety of metals: soft (15RC), medium (31RC) and hard (42RC) Our M12™ cordless system offers more than 110 unique sub-compact solutions, transforming inefficient manual tools. The Knipex Tools 7101250 10-inch CoBolt XL Compact Bolt Cutter is an ultra-versatile tool for construction, automotive, farming, fencing applications, and home use.Angled-cut bolt cutters feature a head angled between 25 and 30 degrees. This design makes it easier to position the tool’s head to make lower cuts. This style of bolt cutter can cut off nails and screws protruding from wood flush to the surface. It may have a mini design, but the Capri Tools CP40209 40209 8-inch Klinge Mini Bolt Cutter has surprising strength for challenging tasks. Powers through stainless steel, spring wire, heat-treated rod, reinforcing rod, steel cable, and bolts These tools work by pulling the rope into the jaws and trapping it. This makes a clean cut and results in no fanning. They are ideal for shearing wire rope. Easily identifiable by their pincers, they have a shorter gripping surface at the tip and a cutting surface in the middle. These tools are popular in electrical and communications tasks, as well as construction. They are ideal for grasping, splicing or chopping leads and strip insulation.

Like the other H.K. Porter bolt cutters we tested, the hinges on this 18-inch model were stiff when we started testing. It could be something common to this brand of bolt cutter, but the hinges eventually loosened up after 20 or so cuts to where we didn’t have to pull the handles forcefully to separate them.Since users must apply a significant amount of force when using bolt cutters, the bolt cutters must have comfortable and durable handles to protect users’ hands and extend the tool’s life. Most bolt cutter handles consist of steel tubes that resist bending and feature padded grips to maximize comfort and control.